FileDownload Electronic Earthing System is composed of one IIB aluminium alloy enclosure (EJB 8A type) inside which there is an electronic resistance/capacity device and externally a support hook, an earthing clamp, complete with 8 m of cable, to measure and check the continuity towards the earth, aiming to eliminate the electrostatic charges. Enclosure has on the cover a green and a red pilot light as agreement or refuse to proceed. Its modularity by jumpers or trimmers placed on the electronic card, allows the selection of different capacity or resistance sensibility levels.
FileDownload The grounding plugs ISEO I type are particularly indicated for the earthing of tanks, basins, drums, etc..
FileDownload The IS1 earthing clamp is composed by two aluminium alloy jaws with tempered steel contacts ends and insulated thermoplastic handles, resistant to oils, fuels, paints and diluents. After having connected the clamp to any grip, having dimension between 3 and 30mm, the closing of the electric contact happens in an appropriate EExd chamber placed on one of the two jaws. The clamp comes complete with 8 m. of highly flexible cable 1x6mm2, chemical aggressive resistant. The IS2 earthing clamp is exactly made as IS1, but with one auxiliary contact NO to control the happened earthing.
FileDownload Insect destroyer for explosive gas atmosphere. It attracts insects with UV lamps and traps adhesive sheet. For zones 1 and 21 (explosives zones per gas).DIVATEX S-40 effectively fight flying insects in this zones.
FileDownload The Insectron range of insect exterminators is believed to be the first electronic insect exterminator granted ATEX approval for use in explosive, dusty and wet environments. Can be installed in potentially hazardous areas such as grain, animal feed and coal processing and storage facilities, flour mills, sugar factories and large bakeries, where combustible dusts can easily ignite.
FileDownload The warning devices SACK are composed of a cylindrical body with acoustic diffuser in thermoplastic material. The unit issue a high frequency mono-toneor double-tone signal at 98 decibels. For the acousting warning of alarms, damages, etc..
FileDownload The ETH acoustic device consists of a body and a cover in aluminium alloy connected by socket head screws. Working by vibrating membrane with diffuser cone.For acoustic warning of alarms, failures, and so on.
FileDownload The rotary sirens ETS 60 are composed by a body in aluminium alloy with screwed cover.Acoustic warning of alarms, averages, etc.
FileDownload The ETS 60 series available in Stainless Steel 316 L version for sea environments, off-shore platforms and very aggressive chemical environments.
FileDownload Enclosure in light alloy. RAL 7000 external epoxy coating.