LIMIT SWITCH

LIMIT SWITCH

The range of limit switch sensors is made up of the LS series, durable and economical, made from cast aluminum, stainless steel or G.R.P. to be installed in explosive locations; gas (IIC or IIB + H2) or dust (Zone 1-2 and 21-22). They are ATEX and IECEx certified according to EN and IEC standards. Applications in accordance with directive 2014/34 / EU. The type of protection used is Ex d, Ex e or Ex i. Position switches are used for fast, normal or slow door opening or the like. Emergency stops, for example, can be attached and used at the edge of chemical barrel production lines to directly stop the line in the event of a problem.

Read more about the article LS692 Key safety switch ATEX
LIMIT SWITCH
LS692 Key safety switch ATEX

FileDownload LS692 Key safety switch with positive opening 1NO+1NC -The safety circuit must be connected to the NC contact 21-22 with the key plugged in.-The safety switches are fixed to the body of the machine, while the key is fixed to the protection - The head of the switch can be positioned on each of the four sides of the switch by unfastening the four fixing screws:8 different driving directions can be obtained.

Comments Off on LS692 Key safety switch ATEX
March 11, 2020
Read more about the article PS.AG Float limit switch
LIMIT SWITCH
PS.AG Float limit switch

FileDownload The PS..AG float limit switch consists of a body with actuator and adjustable rod on the length and on the inclination. It is complete of wire, float, counter-weight and with action in two directions (with float on the right or on the left side). To control level of tanks, and so on.

Comments Off on PS.AG Float limit switch
March 11, 2020
Read more about the article Limit Switch ATEX
LIMIT SWITCH
Limit Switch ATEX

FileDownload LS series are used and implanted on hazardous area gas and dust. Possibility of entry dérivation by the 3 sides. Economic and strong, with a large choice of rotative head. Possibility to 2NO + 2NC on the contacts, positive opening.

Comments Off on Limit Switch ATEX
March 11, 2020
Read more about the article LS5169 Limit Switch Atex
LIMIT SWITCH
LS5169 Limit Switch Atex

LS5169 Limit switch with rigid rod lever nylon. LS series are used and implanted on hazardous area gas and dust. Possibility of entry dérivation by the 3 sides. Economic and strong, with a large choice of rotative head. Possibility to 2NO + 2NC on the contacts, positive opening. FileDownload

Comments Off on LS5169 Limit Switch Atex
March 11, 2020
Read more about the article LS5155 Limit Switch Atex
LIMIT SWITCH
LS5155 Limit Switch Atex

FileDownload LS5155 Limit switch with lengthened roll lever. LS series are used and implanted on hazardous area gas and dust. Possibility of entry dérivation by the 3 sides. Economic and strong, with a large choice of rotative head. Possibility to 2NO + 2NC on the contacts, positive opening.

Comments Off on LS5155 Limit Switch Atex
March 11, 2020
Read more about the article LS5150 Limit Switch Atex
LIMIT SWITCH
LS5150 Limit Switch Atex

FileDownload LS5150 Limit switch with rigid round rod lever stainless steel. LS series are used and implanted on hazardous area gas and dust. Possibility of entry dérivation by the 3 sides. Economic and strong, with a large choice of rotative head. Possibility to 2NO + 2NC on the contacts, positive opening.

Comments Off on LS5150 Limit Switch Atex
March 11, 2020
Read more about the article LS5130 Limit Switch Atex
LIMIT SWITCH
LS5130 Limit Switch Atex

FileDownload LS5130 Limit switch with roller lever. LS series are used and implanted on hazardous area gas and dust. Possibility of entry dérivation by the 3 sides. Economic and strong, with a large choice of rotative head. Possibility to 2NO + 2NC on the contacts, positive opening.

Comments Off on LS5130 Limit Switch Atex
March 11, 2020
Read more about the article LS5121 Limit Switch Atex
LIMIT SWITCH
LS5121 Limit Switch Atex

FileDownload LS5121 Limit switch with spring rod stainless steel (1.2mm) LS series are used and implanted on hazardous area gas and dust. Possibility of entry dérivation by the 3 sides. Economic and strong, with a large choice of rotative head. Possibility to 2NO + 2NC on the contacts, positive opening.

Comments Off on LS5121 Limit Switch Atex
March 11, 2020
Read more about the article LS5120 Limit Switch Atex
LIMIT SWITCH
LS5120 Limit Switch Atex

FileDownload LS5120 with spring rod stainless steel (3.5mm). LS series are used and implanted on hazardous area gas and dust. Possibility of entry dérivation by the 3 sides. Economic and strong, with a large choice of rotative head. Possibility to 2NO + 2NC on the contacts, positive opening.

Comments Off on LS5120 Limit Switch Atex
March 11, 2020