PMT Earthing clamp

FileDownload The PMT earthing clamp consists of a robust cylindrical housing covering the metallic body containing an EExd chamber where the contact happens only after having connected the clamp to the plate.It is supplied with cable gland and support hook.

Comments Off on PMT Earthing clamp
Grounding Clamp ATEX IECEx ON/OFF

FileDownload Indispensable in cases where the temporary grounding of tank trucks or tankers during transfer of liquids or hazardous substances is required for truck, refueling,wagon, vehicules .The fastener is secured by two brass springs of great strength.To be connected on sheet ground metalON/OFF internal switch connexionRugerdise – SafetyOil & gas – Maritim – AeronauticBuid with internal flameproof switch ON/OFF to establish the contact when the clamp is tight to avoid sparks.

Comments Off on Grounding Clamp ATEX IECEx ON/OFF
DMT14 Electronic earthing system

FileDownload Electronic Earthing System is composed of one IIB aluminium alloy enclosure (EJB 8A type) inside which there is an electronic resistance/capacity device and externally a support hook, an earthing clamp, complete with 8 m of cable, to measure and check the continuity towards the earth, aiming to eliminate the electrostatic charges. Enclosure has on the cover a green and a red pilot light as agreement or refuse to proceed. Its modularity by jumpers or trimmers placed on the electronic card, allows the selection of different capacity or resistance sensibility levels.

Comments Off on DMT14 Electronic earthing system
DMT2B. Electronic earthing system

FileDownload DMT 2B is composed by an electronic device resistance/ capacity type and by an earthing clamp complete with 8m of cable to measure and check the continuity towards the earth with the aim to eliminate the electrostatic charges. The allowing and the real earthing of the connected lump, happen only if the object connected to the clamp has both resistance and capacity towards the earth over predetermined values. Checking these controls, the DMT2B system avoids to give the consent if the clamp is connected to lumps already connected to earth resistance towards low earth) or to small size conductivity…

Comments Off on DMT2B. Electronic earthing system
DMT2C. Electronic earthing system

FileDownload DMT 2C is composed by an electronic device resistance/ capacity type and by an earthing clamp complete with 8m of cable to measure and check the continuity towards the earth with the aim to eliminate the electrostatic charges. The allowing and the real earthing of the connected lump, happen only if the object connected to the clamp has both resistance and capacity towards the earth over predetermined

Comments Off on DMT2C. Electronic earthing system
ISEO I Grounding plugs ATEX

FileDownload The grounding plugs ISEO I type are particularly indicated for the earthing of tanks, basins, drums, etc..

Comments Off on ISEO I Grounding plugs ATEX
IS. Earthing clamp

FileDownload The IS1 earthing clamp is composed by two aluminium alloy jaws with tempered steel contacts ends and insulated thermoplastic handles, resistant to oils, fuels, paints and diluents. After having connected the clamp to any grip, having dimension between 3 and 30mm, the closing of the electric contact happens in an appropriate EExd chamber placed on one of the two jaws. The clamp comes complete with 8 m. of highly flexible cable 1x6mm2, chemical aggressive resistant. The IS2 earthing clamp is exactly made as IS1, but with one auxiliary contact NO to control the happened earthing.

Comments Off on IS. Earthing clamp